Subaru Head Gasket Problems – How Can You Fix Them For Good?

You may have heard rumors of Subaru head gasket problems. The term “Subaru weak head gasket” often comes up on forums and other sites.

So, what’s the truth about this topic? And what should you do if you have a problem?

Or perhaps you’ve discovered one of the chilling, tell-tale signs that the head gasket has blown.

Whatever your reason for reading this article today, we hope you find something useful here.

To begin with, we will be looking at Subaru engines and general information about head gaskets. After that, we will look at some common Subaru head gasket problems and the solutions.

• Subaru Engines Overview
• What Are Head Gaskets?
• Subaru Head Gasket Problems
• Is It Worth The Problems?
• Frequently Asked Questions (FAQs)

Subaru Engine

Subaru. Perhaps the best-known company when we think about road-legal rally cars. The Impreza, in particular, is almost impossible to think about without the mind flashing through images of Colin McRae flying through the air, engine screaming.

The public image of Subaru cars – Imprezas in particular – is, undeniably, sometimes associated with class divides. The wide-bore exhausts and Boxer-4 engines aren’t exactly subtle or discreet. Neighbors might understandably not be huge fans.

This is all true, however, this shouldn’t take away from the genius of Subaru cars.

In particular, we will be considering the Boxer (or “Flat”) engines used in these vehicles.

Nowadays, these engines belong to somewhat of a niche group, although a few cars have had them in the past. This includes the famous Citroen 2CV. It was originally designed by Karl Benz with only two cylinders and was named the Contra Engine.

Click here to check out an article on Sport Subaru that talks about these engines in greater detail.

Subaru Reliability

Before delving into Subaru head gasket problems, we’ll briefly touch on a couple of other issues you might face.

Many of these are centered around certain rubber components of the vehicle.

Common Subaru Problems #1: Head Gasket

As we will look at, Subaru head gaskets blowing are far from uncommon.

Common Subaru (Not Head Gasket) Problems #2: Front Suspension

This is a problem that is certainly not unique to Subarus. All cars will go through this, especially those in areas with low-quality roads and/or hot, dry climates.

The front suspension is almost always under more stress, at all times. This is because the engine is almost always located at the front of the car, especially for cars powered by internal combustion engines. There are, of course, a few exceptions to this.

 When you approach a bump in the road and put the brakes on, the weight of the car is thrown to the front of the car. This is called “dive”. When you hit the bump, the majority of the weight of the car is there at the front, putting the suspension here under a great amount of force.

When the car goes in for a service, you should make sure that the front suspension is thoroughly checked. This includes the rubber components.

Common Subaru (Not Head Gasket) Problems #3: Air Conditioning O-Rings

You’ll know your air conditioning isn’t working if, well, it isn’t working. You’ll notice hot, humid air coming through the vents when your AC is on – clearly, something is wrong.

Sometimes your car will just need a re-gas. Taking the car to a qualified technician should solve your problem here. However, the technician may find a leak. Should this happen, you’ll need to take the car to an automotive air conditioning specialist.

The problem with the AC system could likely be the O-Rings. O-Rings are the rubber seals of the air conditioning system. Over time, these may begin to become brittle and degrade, meaning the system won’t work.

This video describes what O-Rings are and where they go, although we wouldn’t recommend installing them yourself. The refrigerants used in air conditioning systems are toxic and illegal to let out into the atmosphere. The job should be left to a specialist (even if you know how to add Freon to car).

To avoid this, try leaving your AC on all the time. Even during winter, but with the temperature on maximum. Sometimes, this might not be practically possible, such as in extreme negative temperatures, but you should do it if possible.

This is because the O-Rings are designed to be constantly lubricated. Turning your air conditioning off for half the year can lead to them becoming brittle. Keeping it on all the time will help them to last longer, as well as be better for your car’s interior.

Common Subaru (Not Head Gasket) Problems #4: Turbo Failure

Again, this is far from a “Subaru-only” problem.

Turbo failure is always going to be quite costly and, as more and more cars come with built-in turbochargers (for environmental reasons, predominantly), this becomes ever-more present in a wider range of cars.

Expect to pay out over $1,000 including labor to get a good-quality new one.

Common Subaru (Not Head Gasket) Problems #5: Boxer Engines (Flat Engines)

These engines are either referred to as Boxer engines or flat engines. For this article, we’ll stick with the term Boxer engine.

They are “horizontally opposed” engines. Only two car companies in the world use this type of engine, these being Subaru and Porsche.

Subaru is a unique company because Boxer engines are used in every single car it makes. Literally. Subaru is the only major car company that rigidly stands by an original concept. This makes it one of the only car companies in the world to rigidly maintain its identity, while also adapting to an ever-changing market. For this reason, we have a lot of admiration for the company.

Boxer engines have cylinders that lie down flat and reciprocate in opposite directions. It is so named because of how similar it looks to a boxer (like Muhammad Ali or Mike Tyson) punching out.

The Boxer engine is unquestionably (in my opinion) the best commercially available engine if you’re looking for performance. In terms of maintenance and upkeep, well, it’s a little bit irritating. But if you are a die-hard Subaru fan, these engines are worth all the problems.

Subaru Engine Problems

These increased levels of performance come from the concept of smoothness. In the mechanical world, the smoother something is (the more efficient it is), the better the power output will be.

In other typical internal combustion engines (ICE) setups, such as inline (also known as “straight”), V-engines, or W-engines, the balance needs to be adjusted in one way or another.

You may have been in a situation before where the car begins vibrating excessively. In this situation, opening the hood often reveals a shaking engine block. The cause is usually a misfire, meaning that one cylinder isn’t firing. This makes the forces unbalanced and, as a result, you get all that shaking, vibrating, and noise. This shows the importance of having a correctly balanced engine.

Inline-4 engines, for example, have balanced forces in the horizontal plane, but don’t in the vertical. Inline-3 engines, though, don’t. Like V- and W-engines, they need components called balancing shafts to force the forces (ha) to balance out.

Boxer engines, though, balance perfectly, without the need for extra interference from engineers. From this, you get smooth, unadulterated power. It features improved balance (compared to other engine setups), which leads to greater levels of power and, importantly, control.

(They are almost always built with four or six cylinders.)

Boxer Engines Advantages

There are also other pros…

• The engine is flat, meaning that the engine’s output can go straight into the transmission. Therefore there are fewer components needed to transfer power, meaning less energy is lost in the process. This is related to the increased levels of fuel economy. It also means that the engine can sit right on the centerline of the car. For most cars with inline engines mounted across the engine bay, the transmission attaches to the side. This creates a slight weight imbalance in itself.
• Increased fuel mileage – compared to other all-wheel drive cars (for comparison, check out our list of the best all wheel drive cars), Subaru vehicles often have a better fuel economy. They’ll also commonly match levels seen in front-wheel-drive cars. In other parts of the world, Boxer engines are often seen as being uneconomical, but this is due to the engine size rather than layout. Why build a performance engine that can’t perform? Compared to inline engines of the same size, Boxer engines are usually more efficient.
• The vehicle’s center of mass is lower, leading to increased handling. It’s basic physics. This is because the Boxer engine is laid out “flat”. Click here to learn more about the center of mass from Khan Academy.
• Boxer engines are safer in case of a head-on collision. This comes down to the shape, again. Because of its layout, the engine dips below the passenger cabin, rather than smashing back into it. This means that you, as either a passenger or the driver, are less likely to be seriously injured. Having said that, nobody wants to be in a head-on collision in the first place…
• Fewer vibrations – nobody wants to be driving a car with excessive vibrations. Again, this comes back to the intricate balance of the engine, which means fewer not-nice-sounding noises are coming from under your hood.

Boxer Engine Disadvantages

There aren’t many, but there are certainly a couple of Subaru Boxer engine disadvantages to mention.

• Maintenance – this is probably the main one. In a normal inline engine and most V- engines, changing your spark plugs or working on your camshafts is relatively simple. They just sat there at the top of the engine. But, because the cylinders are horizontal on a Boxer engine, you’ll have to work your way in from the side. Both sides. It’s much more fiddly and you can expect to never complete any engine-based maintenance without cursing the car many times over.
• Two lots of everything – the layout of the engine means that there are two engine blocks and cylinder heads. This is perhaps part of the reason for the Subaru’s reputation of having head gasket problems – there are just more things that might go wrong.
• Despite all the benefits, the Boxer engine has a pretty large footprint. This can make it kind of tricky to work in all the space for things like the steering rack.

Head Gasket

A head gasket is a vital part of an internal combustion engine. It is a precisely engineered piece of metal that functions as a seal between the cylinder head and engine block. Usually, it’s made of steel. Originally, they would have been made of fibrous composite material.

The engine block is the big, main bit of your motor. It is bolted onto the frame with engine mounts and contains the pistons. Because it contains these components, the block is subjected to a lot of friction and stress. It has to be lubricated and cooled with built-in motor oil and coolant channels.

The cylinder head is the bit that’s bolted on top of the engine block. Here, the air/fuel mixture is ignited and the piston is driven down in the cylinder. It also contains camshafts, valves, and spark plugs. Again, this results in extreme forces and high temperatures.

The head gasket sits between these two components.

Its main function is to keep oil, coolant, and intense forces away from the cylinders as they pass between the head and the block. It also keeps oil and coolant channels sealed and away from each other, so everything works perfectly.

If something goes wrong with the head gasket, this is usually referred to as the head gasket “perforating” or, if it’s completely gone, “blowing”.

Watch this video to see it explained in detail.

Subaru cars have two head gaskets. This is because of Boxer engines and their horizontal layouts, with one cylinder head on each side of the engine bay.

Blown Head Gasket

At face value, you can think of this as being twice as many components that might go wrong. That would be true, but there is a little more to consider when talking about Subaru head gasket problems. We will continue that train of thought in the section “Why Does My Subaru Head Gasket Develop Problems?”.

A head gasket blowing is the main problem you’ll come across with the component.

When you hear the phrase “blown head gasket“, it really just means that the head gasket has failed. Most commonly, this is caused by cracks that develop in it.

It’s called a “blown” head gasket because cracks or holes in the gasket allow pressure to “blow” past it and out of the combustion chamber.

Although it doesn’t look like much on the surface, a head gasket blowing is a major problem. Major.

This is because, without this little piece of metal, coolant and oil are free to jump into the cylinders and get burned up in the normal combustion process. And why is this bad? Well, because the engine is totally dependent on those things – the things that are now burning and being sent out the exhaust as gas.

Keep scrolling down to “How Do I Know I Have Subaru Head Gasket Problems?” for a list of symptoms you should watch out for. Catching this problem early on could save you a lot of time, money, and inconvenience.

Subaru Head Gasket

We will look at this in more detail in a moment.

Subaru cars are, unfortunately, known for head gasket problems. This is particularly true in the following models.

• Impreza (1999-2011).
• Forester (1999-2010).
• Legacy (2000-2009).
• Outback (2000-2011)
• Baja (2003-2005).

It is, of course, not solely limited to these cars though.

In the early years of the above-mentioned ranges, Subaru was using a newly developed steel shim gasket. This is actually harder than most contemporary gaskets. However, this meant that it didn’t adapt so well to surface imperfections on either the head or the block.

As a result, if any of these areas experienced slightly more pressure than another, it could lead to a leak in the gasket.

This doesn’t, in itself, cause the head gasket to fail. But if the engine gets too hot, then is where you might develop a problem, because the head gasket is already weakened in certain spots.

What Causes A Blown Head Gasket

On the average car (as opposed to, specifically, a Subaru), the head gasket usually blows due to either:

1. excessively high temperatures
2. excessive wear, or
3. faulty original components.

These are written in approximate order of likelihood.

Subaru Head Gasket Problems Causes #1: Excessively High Temperatures

This is the most common cause of head gasket failure.

It arises when the engine overheats beyond the temperature range it was built to withstand (such as when a car overheats when AC is on). This could happen because of a variety of things.

• Low oil levels.
• Low coolant levels.
• The fuel mixture is too rich.
• Sensor faults or failures.

When the engine block and cylinder head overheat, they can get so hot that the metal they’re made of warps. As the metal warps, it breaks the head gasket as it sits between them.

If this is the cause of your head gasket failure, you need to get the block and head machined down so they’re perfectly level again. Not doing this, and simply taking the engine apart and replacing the head gasket before rebuilding it, means the head gasket will just fail again.

Make sure you find the original cause of the engine overheating, as listed above. Once you find this problem, you can stop it from happening again.

This may be the root cause of your Subaru head gasket problem.

This is a classic example of the need to catch things early when working on cars. The longer you leave the problem, the more knock-on effects it will have.

Subaru Head Gasket Problems Causes #2: Excessive Wear

Remember, an engine is always vibrating. There are strong forces constantly at play.

As the head gasket sits between the block and the head, they are both vibrating. Over time, this can degrade the metal and slowly break it down. Eventually, it’s almost inevitable for the head gasket to blow, if the car has done enough miles.

If excessive wear is the cause of your blown head gasket may have its benefits. If this is why the head gasket has blown, you may not need to get the block or head machined down or fix any other problems.

The head gasket still needs to be replaced though, of course.

Subaru Head Gasket Problems Causes #3: Faulty Original Components

Faulty original components are the most notorious reason for Subaru head gaskets failing. We will use Subaru as an example to explain this cause.

From 1997 to 1999, Subaru began to use a self-developed head gasket in some models. It was a multi-layer steel shim covered with a graphite layer and wasn’t as effective as many others out there.

There were many benefits to this new steel shim head gasket. It was harder than the aluminum which formed the head and the block and comparatively stronger. Because of this, they don’t compress over time, meaning that they never have to be re-tensioned.

However, steel shim head gaskets are particularly susceptible to surface imperfections. This is a side effect of having an extremely hard gasket. Any slight surface imperfection in the block or head can lead to a disproportionate amount of pressure in that area of the gasket.

Should a situation occur when the engine is running too hot, this can make a leak more likely to develop.

Subaru Head Gasket Problems Causes #4: Boxer Engine Layout

When we look at inline or V-engines, the fluids drain to below the head gasket level when the engine is switched off. However, in Boxer engines, the fluids rest against the head gasket. If they are corrosive enough, they can eat away at the metal over time.

Head gasket failure is a common problem in Subaru engines, but it can be prevented with proper maintenance and care. Regularly check your engine fluids, address any leaks promptly, and use high-quality replacement parts.

Remember, the head gasket plays a crucial role in maintaining your engine’s performance and longevity. Taking the time to address any issues promptly can help to ensure a long and trouble-free life for your Subaru engine.

Subaru Head Gasket Problems Causes #5: Coolant Contamination

Coolant contamination is another common reason for head gasket failure in Subarus. The coolant in your engine plays a crucial role in maintaining the engine’s temperature. However, if the coolant gets contaminated with oil, dirt, or other engine fluids, it can lead to gasket failure.

Contaminated coolant can corrode the head gasket over time. This corrosion can create small holes in the gasket, causing it to fail. When the head gasket fails, it can lead to coolant leaking into the engine oil or vice versa, causing further engine damage.

To prevent this from happening, it’s essential to regularly check and change your engine coolant. Also, make sure to address any oil leaks promptly to avoid contaminating the coolant.

Subaru Head Gasket Problems Causes #6: Incorrect Installation

Another reason for head gasket failure is incorrect installation. If the head gasket is not installed properly, it can lead to uneven pressure on the gasket, causing it to fail prematurely. This usually happens when someone tries to fix the problem without proper knowledge or tools.

Installing a head gasket requires precise torque and sequence. If the bolts are not tightened correctly or in the right order, it can lead to warping of the cylinder head, causing the gasket to fail.

Always make sure to follow the manufacturer’s instructions carefully when installing a new head gasket. If you’re not confident in your mechanical skills, it’s always better to seek professional help.

Subaru Head Gasket Problems Causes #7: Engine Detonation

Engine detonation, or knocking, is another common cause of head gasket failure. This happens when the air-fuel mixture in the cylinders ignites in more than one place at a time. This causes multiple mini-explosions instead of a single, controlled explosion.

These mini-explosions create shock waves that cause the cylinder head to lift slightly, putting extra stress on the head gasket. Over time, this repeated stress can cause the gasket to fail.

To prevent this, it’s essential to use the correct grade of fuel for your vehicle and ensure that the ignition system is in good working order. Regular maintenance and tune-ups can also help to prevent engine detonation.

Subaru Head Gasket Problems Causes #8: Poor Quality Replacement Parts

Using poor-quality replacement parts is another common cause of head gasket failure. Not all parts are created equal, and using inferior-quality parts can lead to more problems down the road.

The head gasket is a critical component that needs to withstand high temperatures and pressures. Using a cheap, low-quality gasket can lead to premature failure and potentially cause further damage to the engine.

Always make sure to use high-quality replacement parts that meet or exceed the manufacturer’s specifications. It’s always better to spend a little more upfront to avoid more costly repairs later on.

Blown Head Gasket Symptoms

Head gasket problems usually lead to coolant and/or oil leaking into the combustion chamber. Once this happens, it gets burnt and sent out through the exhaust pipe. You will notice white (coolant) or blue (oil) smoke coming out of the tailpipe. This is a telltale sign of head gasket failure (although it could also represent several other problems).

Don’t get confused with water vapor that may appear to be white smoke on a cold morning.

You will also probably notice the following symptoms.

• Quick oil consumption.
• Quick coolant consumption.
• Regular overheating of the engine.

You might also notice…

• Oil in the coolant.
• A sulfur-like smell comes from the coolant.
• Milky white colors in the motor oil.

Once you notice these, it’s time to get them fixed.

The head gasket is a crucial component of your Subaru’s engine. It seals the combustion chambers, coolant passages, and oil passages between the cylinder head and engine block. A blown head gasket can lead to a variety of problems, some of which can cause significant damage to your engine. Below are some common signs and symptoms of a blown head gasket in a Subaru engine.

Subaru Head Gasket Problems, Symptoms #1: Overheating Engine

One of the most common symptoms of a blown head gasket is an overheating engine. The head gasket helps maintain the correct temperature by sealing the combustion chamber and keeping the coolant and oil separate. When it fails, coolant can leak into the combustion chamber or oil passages, leading to engine overheating. Regularly check your temperature gauge while driving and if it goes into the red zone, pull over immediately and let the engine cool down.

Subaru Head Gasket Problems, Symptoms #2: Coolant Leak

A visible coolant leak is another common symptom of a blown head gasket. If you notice coolant pooling under your car, it might be because the head gasket has failed. Check the ground where your car is usually parked for any signs of coolant. A sweet, syrupy smell is a good indication that it’s coolant.

Subaru Head Gasket Problems, Symptoms #3: White or Blue Smoke from Exhaust

As mentioned in the excerpt, white smoke from the exhaust is a tell-tale sign of head gasket failure. This is due to coolant leaking into the combustion chamber and getting burned along with the fuel. Additionally, blue smoke from the exhaust indicates that oil is burning, which can also be a result of a blown head gasket.

Subaru Head Gasket Problems, Symptoms #4: Engine Misfires

A blown head gasket can lead to engine misfires. This happens when coolant enters the combustion chamber and interferes with the combustion process. You may notice that your Subaru is not running smoothly or that it is stuttering while driving.

Subaru Head Gasket Problems, Symptoms #5: Milky Oil

As the excerpt noted, milky residue in the engine oil is a prominent indication of a blown head gasket. This happens when coolant mixes with the engine oil, creating a milky, frothy substance. Regularly check your oil dipstick and oil filler cap for any signs of contamination.

Blown Head Gasket Repair

Sorry to be the bearer of bad news, but this is usually best left to the professionals. It’s an expensive job – for a Subaru head gasket change, it’ll probably cost well over $1,000. However, getting it done professionally means the cause of the problem can be properly addressed.

A few advanced tools are needed for this job, including an engine hoist, a precise level, a precise torque wrench, and very good automotive skills.

If all you did was replace the head gasket, the problem may occur again. The root cause of the head gasket failure needs to be discovered and fixed if you’re to be free of the issue in the future.

We strongly recommend facing the cost on this occasion.

However, if you’re confident with what you’re doing, here is a video showing you how to do it. To give you an idea of the scale of this job, this long video is Part 1 of 5.

Here is a link to Part 2, if you would like to watch the whole series.

If you to prevent this from happening in the first place, it essentially breaks down to needing to stop your engine from overheating.

You can do this by:

1. Regularly changing the engine oil.
2. Regularly changing the coolant.
3. Checking the oil and coolant levels often.
4. Use OEM parts, oils, and coolant.

Subaru Reliability Myth

If that’s where you’re heart is at, yes. Subaru is a brand that has rigidly stuck to part of its identity while maintaining a competitive market share. Although head gasket problems are associated with older models, that shouldn’t put you off.

Newer models are far less infamous when it comes to head gasket problems, so you should take some reassurance from that. Don’t forget to research their CVT problems also.

Owning a Subaru, especially a sportier model, can be expensive – no doubt. But if you’re a fan nevertheless, you could consider swallowing the cost and just enjoying these brilliant pieces of engineering.

Prevention is better than cure, especially when it comes to something as crucial as your vehicle’s head gasket. Here are some tips to help you prevent a blown head gasket:

1. Regularly Check and Maintain Coolant Levels

Keeping your coolant at the correct level and mixture is essential for preventing overheating and head gasket failure. Check your coolant level regularly and top it up if necessary. Also, make sure to use the correct type and mixture of coolant recommended by Subaru.

2. Avoid Overheating

Overheating is one of the main causes of head gasket failure. Always keep an eye on your temperature gauge and avoid letting your engine get too hot. If you notice the temperature rising, turn off the air conditioning and turn on the heater to help dissipate the heat.

3. Regular Oil Changes

Regular oil changes are essential for maintaining the health of your engine and preventing head gasket failure. Old, dirty oil can lead to a buildup of sludge and contaminants, which can cause the gasket to fail.

4. Use High-Quality Gaskets

When replacing the head gasket, always use high-quality gaskets. Cheap, low-quality gaskets may not provide a proper seal and can fail prematurely.

A blown head gasket is a serious issue that can cause significant damage to your Subaru engine. Be vigilant about the signs and symptoms mentioned above and take preventive measures to avoid head gasket failure. Regular maintenance and timely intervention can save you from costly repairs and keep your Subaru running smoothly for years to come.

Facts: Signs of a Blown Head Gasket

1. Engine overheating is the most common sign of a failing head gasket. It causes the engine to work harder, lose coolant, and underperform the cooling system, making the situation worse.
2. White smoke from the tailpipe indicates that coolant is being burned due to a leaking head gasket. If the coolant level is chronically low, look for a leak in the cooling system or around the engine.
3. Low coolant level due to consumption by the engine is caused by a head gasket failure between a coolant channel and one of the engine’s combustion chambers. Burning coolant has other symptoms.
4. A bad head gasket leak can cause the engine to lose compression, leading to a rough idle, knocking, and stalling. Technicians can perform a compression leak test to detect the problem.
5. A head gasket leak can allow coolant to mix into the engine oil system, resulting in a frothy mixture that collects under the engine’s oil filler cap. This can be detected by unscrewing the cap and checking the underside for a pale, foamy oil buildup.
6. Left unaddressed, a blown head gasket can cause an overheating engine to suffer a cracked engine block.
7. Capitol Subaru can perform long-lasting head gasket repairs to prevent show-stopping damage to your car if you experience any of the above symptoms.
8. Other problems can cause the engine to run roughly or knock, so it’s essential to determine if the vehicle has a head gasket leak through a compression leak test.
9. A head gasket that has failed internally may mix combustion gasses with the engine oil.
10. A blown head gasket will quickly lead to show-stopping damage to your car if it’s not addressed right away, and early warning signs of a blown head gasket are crucial to preventing further damage.

Subaru Head Gasket Problems: Frequently Asked Questions (FAQs)

If you’re still puzzled by Subaru head gasket problems, our FAQs here might help…

What Is A Head Gasket

A head gasket is one of the most crucial components of any internal combustion engine. As its name implies, the head gasket is essentially a gasket that forms a tight seal between the engine block and cylinder heads. In creating this seal, it performs two functions. Firstly, it keeps your engine’s combustion gases and air-fuel mixture sealed within the combustion chamber. Thus, preventing them from leaking out of the engine, and maintaining an optimum compression level to ensure good performance. Just as crucial, is the fact that the head gasket’s sealing properties allow coolant and motor oil to flow around the engine without leaking into the combustion chamber itself. Or, causing the coolant and engine oil to mix. As such, the head gasket ensures that your engine is sufficiently lubricated and cooled.

How Much Is A Head Gasket

If you’re experiencing serious Subaru head gasket problems, the only permanent solution would likely be to replace the head gasket itself. However, this is a very costly fix, especially for a Subaru. To be fair, the head gasket (just the gasket, i.e. parts only) can often be found for around $100 to $200. Sometimes, even less, depending on what specific Subaru engine you’re fitting it to. However, the reason why you’ll usually end up paying $1,000++ for a Subaru head gasket replacement is the labor required. Changing the head gasket will require major disassembly of the engine, which can take a lot of time. Experienced mechanics will take at least 6 hours to perform this job. Meanwhile, rookies or DIYers may take several days or even upwards of a week to replace the head gasket.

How To Fix A Blown Head Gasket Without Replacing It

In some cases, and if your blown head gasket isn’t too far gone, you can eschew the need to replace it. A typical replacement to solve Subaru head gasket problems can easily cost upwards of $1,000. However, if you catch on to a blown head gasket early on, you could instead use head gasket sealants. You can typically find these for under $50, and they mostly work rather well. Although, do understand that these solutions only work if you apply them early on, as a head gasket that’s too blown will require a replacement, regardless. All you need to do is pour some head gasket sealer into your radiator. Give it a few to circulate around the engine, and its chemicals will slowly re-seal and re-condition the head gaskets.

How Long Do Subarus Last

Subarus are mostly highly dependable and robust. In most cases, a Subaru could easily last at least 150,000 to 200,000 miles and up. This is equivalent to over 13 years’ worth of ownership before any serious rebuilding or restoration work is necessary. Nevertheless, if you practice very diligent maintenance and take good care of your Subaru, there are Subarus out there that have cracked the 300,000-mile threshold. It’s quite clear that owners love their Subarus. According to JD Power, Subaru is among the highest-rated mass market brands when it comes to brand loyalty. Moreover, they’re firmly among the top 25% of the most reliable automakers – not the best, but still respectable. Some of the most reliable Subarus are the Forester, Legacy, Crosstrek, Ascent, and the WRX.

Which Subaru Engines To Avoid

Given the sheer quantity of Subaru head gasket problems, it’s clear that not all Subaru engines are as reliable as others. According to what most owners have experienced, there are two Subaru engines, in particular, that you should avoid if you don’t want to deal with reliability issues. The first is Subaru’s mainstay 2.5-liter turbocharged 4-cylinder engine. This is the same engine that you’d find in an Impreza or WRX. These engines are plagued with weak piston rings, faulty PCV systems, sudden power loss, overheating issues, and many more. The second Subaru engine that you should try to avoid is the EJ25. While it remains an iconic powerplant, we can’t overlook the heavy oil consumption woes, not to mention the countless Subaru head gasket problems.